Packet -

Ga naar de inhoud
 Superb 32 bit program for packet and telnet messaging management. In this section you will find all the versions from the oldest to the most current.
Nice packet software you can run it under windows 7,8,an 10
The multiuser/multitasking BayCom Packet Terminal Driver program is a general purpose communications package for communicating with a BayCom modem attached to your IBM-PC/clone in conjunction with the TFPCX Baycom driver software. The software will also work with a normal TNC if it supports KISS mode, such as the Kantronics range
Putty  is a program that can run as a terminal to control a TNC from a command line
All Outpost programs run on Microsoft Windows O/S from 98 Second Edition through Windows 10.  Additionally. Outpost runs on Linux with Wine 1.6.4 or greater.  To download the latest installation program
Final Version (Added Kantronics Support for TNC's made     though 2003)
Paclink is a streamlined radio e-mail client with a built-in POP/SMTP  server that allows you to use most popular e-mail client programs, like  Microsoft Live Mail, Outlook Express and Mozilla Thunderbird. It is a  single- or multi-user client. It is exceptionally easy to install and  use. Paclink supports telnet (for amateur radio High Speed Multimedia  [HSMM], D-Star DD mode, or internet), VHF/UHF packet radio, and HF  Pactor radio connections to WL2K servers and the user interface is  through any common e-mail client program.
It supports a wide selection of transceivers, TNCs and multimode  controllers, sound card modes using the WINMOR, ARDOP, and VARA virtual  TNCs (WINMOR and ARDOP software TNCs included), Pactor, SCS Robust  Packet, VHF/UHF AX.25 packet radio, and direct telnet to CMS servers or  RMS Relay (for amateur radio High Speed Multimedia [HSMM], Broadband  HamNet, D-Star DD mode, internet, and other TCP/IP networks).
Windows multiuser/multitasking multiport Packet Terminal Driver program for use with multiple Baycom modems or KISS mode TNC's attached to your IBM-PC/clone
SV2AGW packet radio driver, runs TCP/IP protocol over radio, support windows  and several devices like baycom and, E5DXL 9600 G3RUH compatible modems works with windows 10.
This program needs no other explanations because it is just a terminal program. The only difference is that it is multitasking. This means that you can have multiple connects and you can YAPP without restrictions. You can receive as many YAPPs as you wish simultaneously. If you have more than a RadioPort (You have more than a TNC) you can connect in any RadioPort. You can have also unlimited number of connections (about 100).
WinAFSK is a program that allows you to view packet radio traffic, with your radio's audio output connected to your sound device's microphone connector, or with a SDR device or also WebSDR, using an application such as Virtual Audio Cable. It supports AFSK1200, AFSK2400, HAPN4800 and FSK9600 modulations. The current version of WinAFSK (2.01c) has currently been tested only on Windows
Packetsoftware voor windows
packetsoftware voor Baycom modem
Packetsoftware voor windows
New packet radio generation software
software dual-port Packet-Radio TNC that uses a soundcard as a modem
Packetsoftware voor windows
NuPacket is a basic Terminal Node Controller (TNC) interface application designed for performing ARES operations on Windows computers.
Qtmm is a simple AFSK1200 decoder that uses the computer's sound card  for input. It can be used to decode packet radio, APRS and telemetry  from amateur radio satellites Works great with de SDR
X1-J Release 4 TheNet Node software voor TNC
Deze website is gemaakt door GJ Koops
Created With WebSite X5

Winsum (Groningen)
Friday, 04
See 7-Day Forecast
Terug naar de inhoud